Qty Max 0 Loading ...
Total Price: AED 5,237.52
8mm in The Floor
The floorplate fasteners only need to be mortised 8mm in the floor, which means System M can be applied in combination with floor heating.
To ensure the pivot hinge provides the appropriate movement for your door, System M+ is available in seven models suited to the weight and width of the door.
System M+ is suitable for both light and heavy pivot doors covering a range between 20 and 500 kg.
Minimum Door Thickness
40 mm or 50 mm, depending on the suitable model for your door measurements and weight.
Minimum Installation Dimensions Around The Door
Below: 11 mm
Above: Minimum 4 mm, maximum 10 mm Door/closing side.
0˚, 90˚ and -90˚
Minimum Distance From The Pivot Point To The Side Of The Door
Maximum Door Dimensions
Unrestricted up to a maximum weight of 500 kg
For Any Type Of Pivot Door
System M+ is suitable for interior and exterior doors. For more information please contact us.
Floating Floors / Suspended Ceilings
It is possible to fit a pivot door if the floor plate or ceiling plate is connected to the structural subfloor or ceiling.
Delivered as a complete set with top pivot, floor plate, ceiling plate and mounting accessories.
Two years conditional guarantee.
The ceiling plate is fitted in the ceiling, where the pin of the top pivot seamlessly fits into the hole in the ceiling plate. The ceiling plate is available in brushed stainless steel.
The top pivot is mounted into the top of the door. It uses a so-called pinhole connection, in which the pin is fixed to the top pivot and goes into the hole in the ceiling plate when the door is placed.
FritsJurgens’ adjustable pivot hinge System M+ is integrated into the bottom part of the door. The oval base of the hinge fits exactly into the slot in the floor plate that supports the door.
Floor plates for System M+ can be obtained in two finishes and shapes. There is a rectangular version, in brushed stainless steel. They are made of solid tempered steel (Series 420) and thus fully scratch resistant.