Qty Max 200 Loading ...
Total Price: AED 115.20
Product No.: PW3105
Color : Blue Violet
Content : 18L
Free : Roller
Emulsion is a high quality acrylic co-polymer latex paint pigmented with
titanium dioxide and other light fast alkali resistant pigments. It has a very
good wash ability scrub resistance and good colour retention property with a
smooth and pleasing effect. It has excellent brush ability with good resistance
to algae and fungal attacks. [This product is certified by Dubai Central
Laboratory following DM-DLCD-RD-DP21-2180-(IC) Specific Rules for Low Emitting
Materials as per the 2017 Al Sa’fat Dubai Green Building Evaluation System.
Substrates : Concrete, cement plaster, masonry, gypsum, block work etc.
Area of Use : Interiors preferably.
Finish : Smooth & Matt
Color : White + all shades as per Ritver shade card and custom made
gravity : 1.56 ± 0.02
Solids (% by
volume) : 38 ± 2
Diluent : Sweet Water
Flash point : Not Applicable
Spread Rate : While the spread rate is directly dependent on the surface
profile and also the type of undulations it has, by roller and also the
equipment they used, Ritver Matt Emulsion it would cover app 12 m2 / liter at
30 microns per coat.
(30°C) : Set to touch: 1 – 2 hours.
: Ready for Recoat: app
2 - 3 hours.
DFT : 2 coats. App 30 – 40 mic per coat.
A good surface
preparation and following the method statement / recommended system procedure
of Ritver is an ideal recommendation for the application of Ritver Matt
Masonry & Concrete
Achieve a good
and clean surface by removing all contaminants and loose particles by cleaning
& drying. A laitance free surface should be achieved by good sweep blast or
a wire brush. Water washing under pressure is recommended. Apply the Ritver PVA
Primer, or Ritver Acrylic Alkali resistant primer or Ritver All Weather Tex
primer and allow drying as per the data sheet and subject to one more coat for
even coverage. For Exterior: Apply Ritver filler compound (fine or coarse)
evenly and allow drying and following it up with Ritver Matt Emulsion for one
or two coats. For Interior: After applying the Ritver AR primer, apply a
uniform layer of Ritver Stucco putty and then follow it up with Ritver Matt
Emulsion for two coats.
For Old and
In case of
surfaces which are painted / or aged and if there is visible dusting, chalking
or even friable, ensure that all the loose material is removed by scrapping or
metal brush. Apply a good coat Ritver Fungicidal wash compound and allow
Follow this by a
regular coat or two of Ritver Alkali Resistant Primer and continue as in the
above case with the full system.
1 year warranty