+971-4-295-7557
QUOTE
0Cart

Tools Accessories

Sort by:
Newest Items First
Show:
20
Clarke Machine Auger Bit 600mm Long
Clarke Machine Auger Bit 600mm Long
0.0
In stock
2760
Add to cart
+ −
Brand: Clark Designed for use in power drills, drill presses, and boring machines with 1/2″ or larger chuck our full-length heat-treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Its heavy stem increases strength and...
Clarke Auger Bit Handheld/ Screw-Eyed
Clarke Auger Bit Handheld/ Screw-Eyed
0.0
In stock
4416
Add to cart
+ −
Brand: Clark For use on softwood and European hardwoods such as oak, beech, cherry etc.  The rounded single spur of these bits cut a clean edge of the hole and the chisel like cutting edge turns around the threaded centre and removes chips within the previously cut circle.  The scotch...
Clarke SDS Plus 4 Cutter Drill Bit - Chrome Vanadium Steel
Clarke SDS Plus 4 Cutter Drill Bit - Chrome Vanadium Steel
0.0
In stock
400
Add to cart
+ −
Brand: Clark These 4 carbide tip heavy duty heads have been designed for the use of masonry, concrete & armed concrete. Chrome Vanadium Steel Hardened Tempered Chrome finished Long lasting
Clarke Wood Drill Bit - Chrome Vanadium Steel
Clarke Wood Drill Bit - Chrome Vanadium Steel
0.0
In stock
179
Add to cart
+ −
Brand: Clark Bit is precision ground for use in furniture making, doweling, cabinetry, and other woodworking applications where an exact hole size is required.  Spur cutting edges reduce splintering and ensure a smooth, clean hole. Wide flutes provide a fast, continuous flow of chips....
Clarke Parallel Shank Drill Bit - Chrome Vanadium Steel
Clarke Parallel Shank Drill Bit - Chrome Vanadium Steel
0.0
In stock
2622
Add to cart
+ −
Brand: Clarke Bright finish 118° angle 1/2″ reduced parallel shank drill bit for all metals like ferrous, non-ferrous, and alloys up to a tensile strength of 900 N/mm2.  High-Speed Steel twist drill bits are manufactured under DIN standards. Chrome Vanadium Steel Hardened Tempered...
Clarke Taper Shank Drill Bit - Chrome Vanadium Steel
Clarke Taper Shank Drill Bit - Chrome Vanadium Steel
0.0
In stock
3450
Add to cart
+ −
Brand: Clarke Bright finish 118° angle Morse taper shank drill bits for all metals like ferrous, non-ferrous, and alloys up to a tensile strength of 900 N/mm2.  Our High-Speed Steel twist drill bits are manufactured under DIN standards. Chrome Vanadium Steel Hardened Tempered Chrome...
Clarke HSS Drill Bit M-2 Fully Ground Bright Finish - 118° Angle
Clarke HSS Drill Bit M-2 Fully Ground Bright Finish - 118° Angle
0.0
In stock
151
Add to cart
+ −
Brand: Clarke Long life precision M-2 fully ground bright finish 118° angle drill bit for all metals like ferrous, non-ferrous, and alloys up to a tensile strength of 900 N/mm2.  Our High-Speed Steel twist drill bits are manufactured under DIN standards. Chrome Vanadium Steel Hardened...
Clarke HSS Tap & Die Set + Carry Case - Long Lasting For Screw Thread
Clarke HSS Tap & Die Set + Carry Case - Long Lasting For Screw Thread
0.0
In stock
62100
1 Set ( 621.00 per Set)
Add to cart
+ −
Product Code: TDS3-12HC Brand: Clark Threading tools consist of tap and die sets that are used to create screw threads. Built to withstand high amounts for torque and last long. Available in commonly used sizes and thread specifications and also as sets with the necessary adapters. Long...
Clarke - HSS Hole Saw Set with Alloy Backing + Blue Color Carry Case
Clarke HSS Hole Saw Set with Alloy Backing + Blue Color Carry Case
0.0
In stock
26910
1 Set ( 269.10 per Set)
Add to cart
+ −
Brand: Clark Made from hardened heat resistant HSS with alloy backing, these hole saws are strong and shatter resistant. They provide a smoother, faster cut on wood, steel and metal. Comes in a set of 12 or 16 pieces.  Hardened Heat Resistant Alloy Backing Strong & Shatter Resistant...
Clarke Wood Drill Bit 3-12mm, 7pcs Set - Chrome Finish
Clarke Wood Drill Bit 3-12mm, 7pcs Set - Chrome Finish
0.0
In stock
2346
1 Set ( 23.46 per Set)
+ −
Product Code: DBSW3-12C Brand: Clark Set of precision ground wood drill bits for use in furniture making, doweling, cabinetry, and other woodworking applications where an exact hole size is required.  Spur cutting edges reduce splintering and ensure a smooth, clean hole. Wide flutes...
Clarke Masonry Drill Bit 3-12mm, Set of 8pcs - Chrome Finish
Clarke Masonry Drill Bit 3-12mm, Set of 8pcs - Chrome Finish
0.0
In stock
2070
1 Set ( 20.70 per Set)
+ −
Product Code: DBSM3-12C Brand: Clarke Set of Carbide tipped long service life Multi flute drill bits suitable for brick, block, tile, plastic, marble and hard stone applications. Chrome Vanadium Steel Hardened Tempered Chrome finished Long lasting
Leuco Sizing Saw Blades HW - Lownoise "WS"
Leuco Sizing Saw Blades HW - Lownoise "WS"
0.0
In stock
26873
Add to cart
+ −
Brand: Leuco Machine / Application Table Saws Vertical Panel Sizing Saws For Sizing Cuts Design Vibration and Noise Damping Ornaments. Additional Expansion Slots Cutting Material: HL Board 04 plus and HL Board 06 Advantages Extremely low-noise and smooth running...
BrandLeuco No. of Teeth72
Leuco Sizing Saw Blades HW Lownoise "WS" - ATB
Leuco Sizing Saw Blades HW Lownoise "WS" - ATB
0.0
In stock
26357
+ −
Product Code: LE1102328192460 Brand: Leuco Machine / Application Table Saws Vertical Panel Sizing Saws For Sizing Cuts Design Vibration and Noise Damping Ornaments. Additional Expansion Slots Cutting Material: HL Board 04 plus and HL Board 06 Advantages...
Leuco Trimming Saw Blades HW with Chip Limiter "WS"
Leuco Trimming Saw Blades HW with Chip Limiter "WS"
0.0
In stock
14316
Add to cart
+ −
Brand: Leuco MACHINE / APPLICATION Table saws Special saws For sizing cuts in solid woods Especially for knotty woods DESIGN Tooth configuration: alternate top bevel "WS". Cutting material: HW HL Board 10. ADVANTAGES No chipped edges from knots thanks to chip limiter....
BrandLeuco Cutting Diameter300 mm
Leuco Turnover Knives HW with 4 Cutting Edges - 12x12x1.5x4 HL Board 05
Leuco Turnover Knives HW with 4 Cutting Edges - 12x12x1.5x4 HL Board 05
0.0
In stock
690
+ −
Product Code: LE6150515003080 Brand: Leuco Dimension: 12x12x1,5 [mm] B = Width: 12 [mm] H = Height: 12 [mm] S = Thickness: 1.5 [m m] Ø d = Bore Diameter: 4,0 [mm] Wedge∡ = Wedge Angle: 55 [°] LEUCODUR = Cutting Material: HL Board 05 PU = Packing Unit: 10 [pc.] Remarks: Raker...
Leuco Grooving Turnover Knives HW with 4 Cutting Edges - 18x18x1.95x10mm Z4 HLS 15
Leuco Grooving Turnover Knives HW with 4 Cutting Edges - 18x18x1.95x10mm Z4 HLS 15
0.0
In stock
2302
+ −
Product Code: LE6150508163699 Brand: Leuco Design Cutting Material: HW HL Solid 30 for Wood-Based Panels, Hard and Soft Woods Machine / Application For Use in Grooving Cutterheads  Notes Ident-No. 163699 for Groove Width 4 mm   Features: Dimension: 18x18x1,95 [mm] B...
Leuco Sizing Saw Blades "TR-F-FA" Top Wood 300x3.2x30 Z60
Leuco Sizing Saw Blades "TR-F-FA" Top Wood 300x3.2x30 Z60
0.0
In stock
50251
+ −
Product Code: LE1102370181726 Brand: Leuco Machine / Application: Table Saws Vertical Panel Sizing Saws For the Machine of Alucobond Design: Tooth Configuration: Triple Chip/ Flat with Chamfer TR-FA. Additional Expansion Slots. Cutting Material: HW HL Board 03 Feature...
Leuco Gang-Rip Saw Blades Hw With Hw-Rakers "F"
Leuco Gang-Rip Saw Blades Hw With Hw-Rakers "F"
0.0
In stock
42235
+ −
Product Code: LE1101315189297 Brand: Leuco MACHINE / APPLICATION Molders Gang-rip saws with one or two shafts For longitudinal cuts in wet and dry soft woods DESIGN Tooth configuration: flat "F" Cutting material: HW HL Board 20 Type A and C with staggered double keyways...
Leuco Gang-Rip Saw Blades Hw With Cooling Slots "F"
Leuco Gang-Rip Saw Blades Hw With Cooling Slots "F"
0.0
In stock
45167
+ −
Product Code: LE1101310189276 Brand: Leuco MACHINE / APPLICATION Molders       Gang-rip saw with one or two shafts (e.g. Raimann, Paul, Costa,..) For precise ripping cuts in dry and planed hard woods DESIGN tooth configuration: flat "F" cutting material: HW HL Board 10...
Leuco Sizing Saw Blades Hw - Lownoise "Tr-F"
Leuco Sizing Saw Blades Hw - Lownoise "Tr-F"
0.0
In stock
26539
+ −
Product Code: LE1102370192777 Brand: Leuco Table saws Vertical panel sizing saws For sizing cuts DESIGN Vibration and noise damping ornaments. Additional expansion slots Cutting material: HL Board 04 plus and HL Board 06. ADVANTAGES Extremely low-noise and smooth...
Show another 20 products
Bestsellers
Need help? Chat with us!
Whatsaap Chat Button